Also, if you will be clicking on DX Spots to change frequencies in the digital subband, check the check box that says "Don't send mode change with frequency". When operating digital modes, under the Mode By options, select Mode by Frequency (to return the digital mode based on frequency). If you wish to disable rig interface to log a QSO you made previously on another band, etc., you can either select None from the rig list, or from the main form, simply press Ctrl + Shift + R to temporarily disable rig interface.
That way you can instantly load them from any of the other N3FJP Software programs! Once you have rig interface working, click the Save Setting button at the lower left, below the rig list, to save your settings. In addition, when you click on a DX spot from the main form, your rig will tune right to that frequency! If both frequency and mode appear, you are all set! The software will follow your frequency, (and band provided you are in the limits of an Amateur band) and mode. If you have entered your settings correctly, you should be all set to enable rig interface. Most use RTS, some use DTR and some do not require a power option at all.
For Connection Power, select the power option, if any, that your interface requires. Even if only one port is listed, you still have to click on the port to select it.ģ. For Com Port, select the com port that you have your rig connected to. I've also included all the successful settings I've received from other users below, which include the rig ID.Ģ. If there is a small h, such as 64h, ignore it and just enter the two digit number. You should be able to find your rig ID in your manual's CAT control section.
#Ic 7800 set mode data pro#
Icom Users Only! If you select Icom, you will also see text appear, asking you to change the rig ID (64 by default, which happens to be for the 756 Pro II) to the ID for your rig (the red lines in the graphic above). For most rigs, simply selecting the correct rig will also accurately set your baud rate, parity, data bits, stop bits and polling string! You will find the successful settings that users have sent along for the vast majority of rigs we support below. For Select Rig, select the rig you are interfacing. To interface your rig with my software, once you have the necessary hardware connected between your radio and PC, configure the rig interface form as follows:ġ.
#Ic 7800 set mode data how to#
Here is a video that young Faith Hannah, AE4FH put together, demonstrating how to interface an Icom 7300 with my software:
#Ic 7800 set mode data manual#
Check the CAT control section of your radio's manual for more details. Many modern rigs now connect directly to your PC with a simple USB cable. To get started with rig interface, you'll need the necessary interface hardware to connect your rig to your PC.
The following is the essential information you'll need to get your rig interface connected, up and running with AC Log and my contesting software.
0 kommentar(er)
